Canam Pipe and Supply

Canam Pipe & Supply manufacture our own progressing cavity pumping ( PCP ) system, The “Twister”.

Our PCP assembly consists of our TW Series Drive Systems, available in a range of from 10–50 HP, plus our line of Progressive Cavity Pumps (PCP) in either an “EvenWall” or Standard design, covering a wide range of models and sizes.

For all of our specifications and additional information, as well as your PCP requirements contact Canam Pipe & Supply.

Progressing Cavity Pumps

Canam Pipe & Supply also offer a wide range of Progressing Cavity Pumps ( PCP ) in both the “Standard” and the “EvenWall” design as part of our complete line of PCP equipment and assemblies.

Progressing Cavity (PC) Pumps are a widely accepted means of artificial lift; with high production, lift capacity, and system efficiency being a few of the major benefits over other oil and water pumping systems. The ability for PC pumps to handle sand and viscous fluids make them the best solution for heavy oil production and the high gas oil ratio tolerance is beneficial in pumping mixtures of sand, oil, gas and water.

PC pumps are comprised of two parts - a helical shaped steel rotor and a stator. The rotor, which is the rotating internal component of the pump, is normally driven by a rod string. It is precision machined from high strength steel and coated with a wear resistance layer, such as chrome. The stator is attached to the production tubing string and remains stationary during normal operation. It consists of a molded elastomer permanently bonded to the inside of a steel tube. As the PC pump operates, cavities formed between the stator and rotor move fluid upward in a non-pulsating action from the intake to the discharge of the pump. Pressure builds linearly from the intake to the discharge of the pump providing the necessary lift to produce fluid to surface.

In addition to our Drive System, Canam Pipe & Supply has available additional accessories to make up your complete PCP System including the following components :

Integrated Pumping Tee ( IPT )

Stuffing Box

Rod Centralizers

Torque Anchor

Sucker Rods

Pony Rods

Polished Rods

Rod Clamps

Rod Couplings

Rod Guides

Variable Frequency Drives ( VFD )

For all PCP applications, you will find a Well Data form attached, which will need to be filled out and returned to Canam, so that we can design the proper system for your needs.

• Well Data Form

Please see the attached links for additional information on the “Twister” PCP system and all the available components.

• Twister Collage Brochure
• Twister PC Pump Schematic
• PCP Applications & Limitations
• TW-25 Drive Head Assembly Brochure
• TW-50 Drive Head Assembly Brochure
• Twister PC Pump Specifications Brochure
• EvenWall Advantages
• EvenWall Pump Brochure
• Elastomer Specification – EvenWall Pumps
• Standard Pump Brochure
• Elastomer Specification – Standard Pumps
• Application Guide For Typical Elastomers
• Centralizer Brochure
• Integrated Pumping Tee ( IPT ) Brochure
• Dual Pack Stuffing Box Brochure
• Torque Anchor Brochure
• VFD Brochure
• Hydraulic Drive Brochure
• Sheaves / Bushings / Belts
• Polished Rods
• Sucker Rods / Drive Rods / Pony Rods
• Rod Couplings
• Rod Guides
• Rod Clamps
• Tubing Drains
• Swedge Adapter / Tubing & Casing Nipples
• Pup Joints
• Gas Separators
• Prime Mover / Electric Motors
• Pump Seating Nipples